Daily Archives: Thursday February 1st, 2018

Membrane

Molecular filtration membrane for RO systems (50 GPD)

Semi-permeable membrane is the most important part of Molecular Filtration System (RO).

The membrane consists of several thin layers, interconnected by a spiral coil (also known as thin film composite membrane or TFC).

The material of the membrane is semipermeable; it is a barrier for: organic and inorganic impurities and dissolved solids in the water, heavy metals and radioactive elements toxic and carcinogenic chemicals.

Currently this is the best and most efficient method of purifying water. Performance of the membrane can be tailored to individual needs. Our offer includes membrane yields:

• 50 GPD

• 75 GPD

• 100 GPD

Pollution eliminated by Molecular Filtration System with Molecular MEMBRANE:

• Chlorine > 97%

• Radioactive elements > 90%

• Calcium and magnesium (hardness) > 96%

• Liquid fuels > 98%\

• Nitrates and nitrites > 83%

• Aromatic hydrocarbons > 98%

• Heavy metals (eg. lead, mercury, etc.) > 97%

• Bacteria > 99%

In-line Post Carbon

Inline – Active Carbon Cartridge\r\n\r\nAdvantages of activated carbon:

    • Uses the ability of absorbing chemical pollutants by the activated carbon.
    • Removes gases and volatile, improving the taste and odor of water. Comprises a porous activated carbon.
    • Grain structure results in a very rapid absorption of pollutants even at high flow of water.

Mainly used in molecular filters. Replacing every six months (depending on the level of water consumption and the degree of contamination)

Carbon Block Cartridge

Cartridge 10” with Activated Carbon from coconut shell.

It contains a single block of activated carbon from compressed coconut shells.

This structure enables longer contact between water and the cartridge, ensuring top quality purification.

Carbon block cartridges in particular:

• improve the taste and smell of water

• remove particles larger than 10 microns

• remove chlorine and its derivatives

• eliminate lead and other toxic heavy metals

• remove organic compounds (i.e. bacteria)

Coal block cartridges are used in housings 10″, 20″ and molecular filters.

The recommended period of use: approx. 6 months or 18000 liters (depending on the level of water consumption and the degree of contamination)

Cartridge 10” Sediment Foam

Cartridge 10” sediment foam 1 ~ 50 micron

Cartridge is available as 1, 5, 10, 20, 50 microns.

Purify water by removing following impurities: 

    • sand
    • river mud
    • mule
    • rust
    • pollen
    • microorganisms
    • coal dust and other sediments.

They are made of polypropylene fiber meltblown sputter method.

The high density allows to eliminate the deposits of impurities ranging in size from 50 to 1 micron (1 micron = 0.001 millimeter).

They are resistant to chemicals and bacteria. They are designed for 10″ Domestic water filter housings and molecular filters (RO device).

Efficiency (max flow): up to 15 liters per minute.

Capacity: 6 months or 12,000 liters.

The scope of the particulate filtration

Cartridges are available in either: 1, 5, 10, 20, 50 microns