All posts by Adepto Company

Osmofarm: A Perfect Solution for Water Preparation in Dentistry

The development of technology in dentistry and laboratories also revealed the need for high quality water that does not contain anything but clean water. If you need osmosis or demineralized water to maintain the highest quality in the performance of your business, Adepto Company d.o.o. offers perfect and simple solutions.

One such solution, especially in dental practice is a highly sophisticated OSMOFARM 300 device.

The dental unit requires microbiologically pure and salt-free water to avoid lime accumulation of the dental unit parts (solenoid valves, dials, syringes, turbines and micromotors).

Furthermore, water with these characteristics allows a drastic removal of biofilm within the dental unit’s water pipe, which represents the best prevention for the most endangering bacteria compared to ordinary disinfectants. Finally, we must not forget that water from dental units is dispersed in the working environment of the office, thus increasing the bacterial contamination.

About OSMOFARM 300:

A highly sophisticated water treatment and disinfection device, which includes among other things an ozone generator is intended for dental offices. It creates an obstacle in the dental unit lubrication, which allows the removal of bacteria.

It supplies 10 dental units of any brand.

It supplies up to 3 class B autoclaves.

It supplies the washbasin in the sterilization room.

It removes technical failure of equipment sensitive to the accumulation of lime.

It feeds flow of water that does not contain organic and bacterial ingredients, thus eliminating the molecular film.

Allows you to charge ultrasonic wash basins with microclimate clean water for istruments washing.

It allows you to have perfectly clean instruments with no deposits.

The equipment we offer has a certificate from the Ministry of Health of the Republic of Italy and as such meets all European standards in medical institutions. 

Membrane

Molecular filtration membrane for RO systems (50 GPD)

Semi-permeable membrane is the most important part of Molecular Filtration System (RO).

The membrane consists of several thin layers, interconnected by a spiral coil (also known as thin film composite membrane or TFC).

The material of the membrane is semipermeable; it is a barrier for: organic and inorganic impurities and dissolved solids in the water, heavy metals and radioactive elements toxic and carcinogenic chemicals.

Currently this is the best and most efficient method of purifying water. Performance of the membrane can be tailored to individual needs. Our offer includes membrane yields:

• 50 GPD

• 75 GPD

• 100 GPD

Pollution eliminated by Molecular Filtration System with Molecular MEMBRANE:

• Chlorine > 97%

• Radioactive elements > 90%

• Calcium and magnesium (hardness) > 96%

• Liquid fuels > 98%\

• Nitrates and nitrites > 83%

• Aromatic hydrocarbons > 98%

• Heavy metals (eg. lead, mercury, etc.) > 97%

• Bacteria > 99%

In-line Post Carbon

Inline – Active Carbon Cartridge\r\n\r\nAdvantages of activated carbon:

    • Uses the ability of absorbing chemical pollutants by the activated carbon.
    • Removes gases and volatile, improving the taste and odor of water. Comprises a porous activated carbon.
    • Grain structure results in a very rapid absorption of pollutants even at high flow of water.

Mainly used in molecular filters. Replacing every six months (depending on the level of water consumption and the degree of contamination)

Carbon Block Cartridge

Cartridge 10” with Activated Carbon from coconut shell.

It contains a single block of activated carbon from compressed coconut shells.

This structure enables longer contact between water and the cartridge, ensuring top quality purification.

Carbon block cartridges in particular:

• improve the taste and smell of water

• remove particles larger than 10 microns

• remove chlorine and its derivatives

• eliminate lead and other toxic heavy metals

• remove organic compounds (i.e. bacteria)

Coal block cartridges are used in housings 10″, 20″ and molecular filters.

The recommended period of use: approx. 6 months or 18000 liters (depending on the level of water consumption and the degree of contamination)

Cartridge 10” Sediment Foam

Cartridge 10” sediment foam 1 ~ 50 micron

Cartridge is available as 1, 5, 10, 20, 50 microns.

Purify water by removing following impurities: 

    • sand
    • river mud
    • mule
    • rust
    • pollen
    • microorganisms
    • coal dust and other sediments.

They are made of polypropylene fiber meltblown sputter method.

The high density allows to eliminate the deposits of impurities ranging in size from 50 to 1 micron (1 micron = 0.001 millimeter).

They are resistant to chemicals and bacteria. They are designed for 10″ Domestic water filter housings and molecular filters (RO device).

Efficiency (max flow): up to 15 liters per minute.

Capacity: 6 months or 12,000 liters.

The scope of the particulate filtration

Cartridges are available in either: 1, 5, 10, 20, 50 microns